Strange days come and go with our Apple devices. On this occasion, We will focus on the Apple Watch that is stuck on the Apple logo for some strange reasonYou might be experiencing a weird boot loop, or the problem might be internal to the device and have nothing to do with the software, it could be the other way around.

• The old trusty forces Apple Watch to reboot
• Play audio from your iPhone with the search app
• Prevents Apple Watch from getting stuck or unexpectedly restarting
• Still doing the infinite loop? You’ll need to visit your nearest Apple Store

The old trusty forces Apple Watch to reboot

Apple Watch has a strange behavior where the screen won’t stop flashing and takes several restarts without exiting the Apple logo. In this case, the best force a hard reboot As Apple recommends on its tech support page.

Force restart Apple Watch

1. Press and hold the digital crown and side button for 10 seconds
2. The Apple Watch screen should immediately go completely black; once this happens, release the buttons
3. Wait at least 1 minute for the clock to completely reset
4. If the infinite loop returns, It wouldn’t hurt to try a few more times.

Consulting forums like Reddit for information on this issue, Some users report restarting their smartwatches up to 10 times How to unlock your Apple Watch from the apple logo. Some recommend charging the device between each attempt.

Play audio from your iPhone with the search app

Following the same pattern of possible solutions, Some users have managed to reverse the bad situation of their Apple Watch by playing sound on it.This is achieved thanks to the Search application that can be opened on iPhone, iPad or Mac.

Play sound in Search app for Apple Watch

1. Open the app and Look for the Devices tab
2. Select Apple Watch and then tap the Play Sound button
3. In this case, it is recommended that you try several times until you get a successful result.
4. If you have other Apple devices, it’s worth opening the audio playback screens and giving a different time for each iPhone, iPad and Mac present.

Prevents Apple Watch from getting stuck or unexpectedly restarting

If you have managed to unlock the smartwatch from this endless loop or unexpected restarts, there is a chance that it will happen again. If the fault is due to a software problem, It is important to note that the Apple Watch must be updated to the latest version of watchOS.. When you need to apply a pending update, check the Watch app on your iPhone, then General, then Software Update. In one case, an Apple Watch Series 3 owner was able to use the device again after applying the watchOS 7.3 update.

Another important factor is to maintain it from time to time. as it might be with an iPhone, iPad or Mac, in which case restoration is the best way to keep it healthy. Wipe Apple Watch and leave it like newpair again. Don’t forget to sync the latest data with your iPhone to avoid losing your workout and health records.

Delete Apple Watch from iPhone

1. Hungry Watch the app on your iPhone
2. Go General and then Reset
3. Select Erase Apple Watch Content and Settings

Other steps to erase Apple Watch are done from the watch itself, from Settings, General, and then Reset.. To delete it, you will be asked to enter your Apple account password to cancel your Search app subscription. It is better not to restore with a backup for complete restoration.

Reset watchOS from Apple Watch

Still doing the infinite loop? You’ll need to visit your nearest Apple Store

If your Apple Watch is under warranty or you have signed up for AppleCare+, It is best to go to an Apple Store or authorized store to get a proper diagnosis.. As we mentioned before, The problem may be related to the hardware of the smartwatch. There may be some internal damage caused by battery or liquids or other substances.

These types of issues remind me of the problem I had with my Apple Watch Series 2 back then. This was the first time I encountered an abnormal situation, the interesting thing was that the real reason for the restarts was never determined. In my case, The clock unexpectedly restarted a few minutes later. It could be used and remained stationary but then the watch got hot when this happened.

Apple Watch stuck on apple logo

Unfortunately, my Apple Watch was no longer under warranty. so I made an appointment at an authorized dealer (there is no Apple Store nearby) and they were able to use the diagnostic tool for free.The minor clarification was related to the firmware, although their tests did not show any errors. After running the diagnostics several times the watch stopped restarting and that’s when I took the opportunity to delete it completely. That solved the problem.

Before you make an appointment, if you have time to talk to an Apple employee on the phone, you can request a call or use the online chat to see what the Apple technical team recommends.

You can follow iPadify yourself On Facebook, WhatsApp, Twitter (X) or check our Telegram channel to stay updated with the latest tech news.