Apple has shared a new support document that explains how to care for the Vision Pro helmet.

The company warns that disinfectants such as isopropyl alcohol, Windex and Clorox should not be used to clean the Vision Pro. Instead of this holder, simply use a dry or slightly damp cloth.

To clean the screen protector, Vision Pro recommends using a clean, dry microfiber cloth, such as the display cloth included with the headset. If necessary, users can also spray ZEISS cleaning liquid onto a cloth before wiping down the Vision Pro.

Apple warns that the polishing cloth may attract particles that can scratch the Vision Pro. The included fabric can be washed and dried in the washing machine or by hand.

To clean the internal displays, users should first attach the Vision Pro cover and place the headset on a flat surface. Then wipe the optical displays with a microfiber cloth, if necessary, using ZEISS Cleaning Spray.

ZEISS optical inserts must be removed from the Vision Pro before cleaning. They can be cleaned with ZEISS lens wipes, ZEISS cleaning spray or warm water. Before connecting to the headset, they should be completely dried.

Device owners should use a lint-free cloth, soft brush, or non-stick tape to remove debris stuck to the area around the display. Stain in this area can be removed by wiping with a damp cloth, but be careful not to get the displays wet.

To clean the Light Seal, Light Seal Cushion, head straps and cover, users can use unscented utensils, but cleaning wipes, disinfectant wipes and laundry detergent should be used.

5 teaspoons (25 ml) unscented dish soap should be mixed with two cups (500 ml) warm water in clean containers before dissolving Light Seal, Light Seal Cushion, head strap or case into the liquid and gently rubbing the surface around two minutes. The nozzle should then be removed and rinsed under running water, squeezing it to remove excess soap, and then left to dry on heat. It should not be used until it is completely dry.

Headphone straps should be wiped with a lint-free cloth. They can be lightly dampened with water and hypoallergenic soap, but be aware of their location in the microphone, speakers, power jack, headband jack, and aluminum cover. Before connecting to the main system, it should be dried with a cloth. The speaker grilles can be cleaned with a dry cotton swab.

After disconnecting the battery, you can leave a damp, lint-free cloth to evaporate the moisture near the power cable connector. To clean the cable itself, you can use a cloth dampened with soapy water. It should be left to dry overnight before being used again with the Vision Pro.






Source: Iphones RU

Previous articleApple explained what to do if you feel uncomfortable using Vision Pro
Next articleCarl Weathers, Apollo Creed in Rocky and Greef Karga in The Mandalorian have died at the age of 76.
I am a professional journalist and content creator with extensive experience writing for news websites. I currently work as an author at Gadget Onus, where I specialize in covering hot news topics. My written pieces have been published on some of the biggest media outlets around the world, including The Guardian and BBC News.

LEAVE A REPLY

Please enter your comment!
Please enter your name here