One of the customization options for every smartphone is case thickness. Some manufacturers are trying to release thinner smartphones and beat it in every possible way in the election campaign, while others simply do not pay attention to this, focusing on other advertising parameters of devices.
Cupertino did not take a single detail from third-party and at one time reached the maximum reduction in the density of produced iPhones, and then slowly began to increase this parameter.
Currently, all stages of changes are traced, and iPhones appear and the reasons for this or that decision of the company are discovered.
iPhone – iPhone 3GS. Finding Your Own Style
iPhone first generation was the thickness 11.6mm. Today, this is a very high figure, but by the standards of 2007, this is considered normal.
During the release of the first generations of their own smartphones, Cupertinos find themselves groping for their style and discover that they are different from other gadgets. If the first generation iPhone looked very attractive and original, then here are a couple of models iPhone 3G/3GS received a very contradictory appearance.
Dimensions, compared with the conservative, have grown in almost all directions. The shape of the case turned out to be strange, the gadget rests uncertainly on the hand. Some called this iPhone “remnant”. by the way couple iPhone 3G/3GS is the consumption of thick Apple smartphones. Thickness in most composition 12.3mm.
Only after that did the company seriously take up the appearance and begin that international pursuit of body protection.
iPhone 4 – iPhone 6. Pursuit of body consciousness
By the fourth generation of smartphones, the Cupertinos found their style and found perhaps the best iPhone of all time.
There was everything here: a stylish combination of glass panels and a metal frame, an outstanding thickness for its time and a fairly promising filling. Many people still consider the iPhone 4/4s models to be popular and popular Apple smartphones.
The gadget has become much larger than its defender, which has a positive effect on ergonomics and grip comfort. In those distant days of using an iPhone, you could use one hand, reaching your thumb to the opposite corner of the screen.
The thickness of the iPhone for the first time decreased to less than a centimeter and a mixture 9.3 mm. At the same time, the device did not have any eye-catching elements. The protective glass of the camera was located behind the rear panel and was located on the tabletop without any play or wiggles.
Such is the reporting period of the pursuit of the body. Most of the released Apple gadgets became thinner than the defenders, which was not always justified.
5/5s models appeared in the iPhone lineup with the same body thickness 7.6 mmand then the Cupertinites acquired the first fairly large gadgets iPhone 6 and iphone 6 plus. Their thickness is 6.9 and 7.1 mmrespectively.
iPhone 6 is still considered the thinnest model of Apple smartphones. But at first, a bulging camera module appeared. The engineers were unable to place the main module in a sufficiently thin case, and the task was to reduce the thickness of the gadget at any cost.
Not only smartphones, but also tablets became thin. Cupertino presented a line iPad Airwhich was smaller and airier than the base iPad.
At the presentation in 2013, a beautiful and spectacular video with a pencil was measured and the iPad Air of the first generation was hidden behind it, a year later they began not to invent anything and simply cut off part of the pencil with a laser, emphasizing the reduced thickness of the second generation iPad Air tablet.
The pursuit of the thickness of the case was not limited to the “weight loss” of smartphones and tablets. Apple has developed a rather strange line of laptops Macbook 12″.
The case was wedge-shaped, as in the line Macbook Air. Its thickness is 0.35-1.31 cm. Even at its thickest point, the case was thinner than current Air models.
To achieve such results, the device was deprived of most of the ports and connectors. The 12-inch MacBook had two ports: a 3.5mm headset jack and one Type-C for charging and peripherals. Only the most unpretentious could use such a result without transitions.
Another trick, which went in pursuit of the case, was a new keyboard mechanism – a butterfly. The buttons were extremely capricious and after a short operation the reader would stick. Official and folk repair methods appeared, which boiled down to what helped in English to purge the keys.
The line lasted less than 5 years, but the Cupertinites stood still for a long time with the consequences of its release. The developers have realized that one universal port in a laptop is extremely small, and the whimsical butterfly keyboard has only recently been replaced with classic scissors in the MacBook Air and MacBook Pro.
iPhone 6s – iPhone 11. Thickening the body for the sake of progress
Just a year later, Apple realized that they were putting all their new technologies in a thinner case. 7 mm almost impossible. And here’s a new feature iphone 6s Requires thickening across the screen.
Sensitivity to the strength of surface sensors reveals the appearance in the first years of moving away from the annual “thinning” of models. The payoff for 3D-Touch was the thickness of the case 7.1mm. Got the same dimensions. iPhone 7 next year.
A year later, the iPhone 8 returned on the same basis and “recovered” again. To add a coil for wireless charging to the body, increase its thickness by another two tenths of a millimeter. She is 7.3mm.
More technological and updated iphone x failed to pack into a case thinner 7.7 mm. A serious set of innovations requires a sufficiently capacious battery and the front of the camera with Face ID does not move to make the case thinner.
Even a ruler iPhone xp, which has increased compared to the size of the case, has become thicker. Her profile has grown to 8.3mm.
The next generation of flagships iPhone 11 Proaccording to tradition, it turned out thicker precautions – 8.1 mm.. Developed volumetric space for larger battery chambers and more capacious.
iPhone 12 – iPhone 14. One step back, two steps forward
In 2020, the developers introduced a new line of iPhones with a redesigned appearance. The case of the iPhone 12 received sharp edges in the style of classic iphone 5/5slosing smooth rounded ends.
This resulted in a more familiar use of space and reduced rearrangement of elements. Model body thickness 7.4mmwhich was just a little short of iPhone 8 and iPhone SE second generation.
in a year iPhone 13/13 Pro “recovered” again. Their thickness is 7.65 mm. If in the line of “firmware” it was possible to record on a newer massive camera, then the basic line did not receive such significant innovations and changes.
And now, in the fall, in the fall, the Cupertino iphone 14/14 pro, which again turned out to be overestimated. Thickness 7.80 mm at iphone 14 and 7.85 mm at the flagship iphone 14 pro.
And again, the thickening of the top model in the theoretical model can be justified by the presence of a new 48-megapixel camera, but the increase in the dimensions of the main iPhone 14 line without obvious differences from propaganda is nothing to write about.
Why is this happening and what is the main problem
Jony Ive is not happy with the increased thickness of the iPhone XR (just kidding)
Great Britain, it is the legendary Briton during his observation at Apple, who has observed the trends on a possible device in all lines. Ive left the group in 2019, but according to rumors, he has not been active since 2015-2016 and simply exercises control functions.
It was during this period that the Cupertino people began to increase the thickness of iPhones, became slimmer Macbook 12″ and happened in the process of accounting for manufactured tablets.
Cook and company at one time fell into the trap of marketers and designers. Every year, the company boasted devices of reduced thickness, which at one moment it became simply impossible to pack the entire set of stuffing.
Then the thickness of the iPhone in centimeters after thin iPhones of 6-7 mm would look strange.
In the photo, the Energizer smartphone failed on the crowdfunding site. With the thickness and weight of the smartphone you need to be careful
Cupertinians are discovering more and more new hull solutions, freeing up space by all available means. In the latest generation, even the physical slot for SIM cards was abandoned (so far only in the US version).
Identifying an older generation of processors may not lead to sufficient power efficiency improvements, which may lead to increased risk of increased power efficiency. Ultimately, you still need batteries and sizes.
You need to step over yourself once and release an iPhone thick enough to eliminate two discussions: install a sufficiently capacious battery and finally remove the protruding camera module.
So it turns out a couple of days of confident battery life and the ability to put devices on a flat surface without swaying and backlash. Perhaps everything will come to this summer in five.
Source: Iphones RU
