Anycubic: The Perfect UV Resin for Your 3D Printer Compositions

Anycubic is professional resin for 3D printers with a lot of possibilities and it will help us to make our projects in the best possible way.

This optimized for projector with LCD sourcesas this is the one that provides the best results and with which the prints will be of higher quality.

It has low shrinkageWhat allow high dimensional stability when printingproviding impressive and very realistic results of what has been designed.

In addition, they receive high-precision models in which clear details are the premise on which this type of resin moves.

With this resin printed parts they will have high detailthey will not experience obvious warpage or shrinkage, other than those cured, they will finally look hard without being brittle.

Another great thing about Anycubic resin is that it opportunity to reduce training time relative to other resins.

The price at which we can take home this Anycubic resin during AliExpress Super Deals is 24.84 euros.

Buy Anycubic 405nm resin

It is a resin that reaches the right hardness for every projectbut leaving room for those small or redundant details that can be nuanced, removing what is not needed and polishing the areas that need it.

We are talking about one 79D hardnessviscosity (25 ºC) 552 mPa, s lcuring wavelength 405 nmthe density in the liquid state is 1.1, and in the solid state 1.184 g/cm3.

With a shrinkage of 7.1%, the tensile strength is 23.4 MPa, and curing time varies from 6 to 10 seconds. You must remember that the life of the resin is one year.

You should also be aware that the manufacturer recommends storing ambient temperature from 15ºC to 35ºCin order for the resin to last longer under ideal conditions, also bearing in mind that excessive sunlight or excessive humidity can damage it.