The Korean robotics company Itone near the Posco E&C plant has developed a special robot to optimize specific production. The Conit Runner was recently unveiled as it is the first prototype. Recently the robot was recommended to do this. Widely produced due to its stringent application requirements.
Concrete is always poured in layers to allow it to dry and harden to prevent cracking. Don’t miss the layers, weak adhesion, they can slide relatively destroy all the light. A good idea is to use concrete to make it even bigger. reinforcement that blocks the supports – but at the same time creates an additional cost item.
An alternative approach is to layer the grooves and ridges so that the new layer of concrete can penetrate them and thereby adhere to the underlying one. This means that you need to save on the frame; you don’t require additional labor, which is also expensive. Robot Conit Runner can automate this process and is included in the package. move along the surface of the concrete groove using two wheel-shafts at an angle of 381 mm.
The peculiarity of the robot is that it is oriented towards itself on the concrete field using ultrasonic sensors, lidar and camera. It is not fully tested, it is not fully tested. the condition of the concrete itself. The material must wait until the spring of a 10-kilogram robot, not for this, because it is very cool and cool, it is not cool. Please use 6mm diameter glass tubes. According to the use of these values, the economy is allocated to reinforcement by 30%, the time of pouring concrete is invested in 85%.
Source: Tech Cult
I am a professional journalist and content creator with extensive experience writing for news websites. I currently work as an author at Gadget Onus, where I specialize in covering hot news topics. My written pieces have been published on some of the biggest media outlets around the world, including The Guardian and BBC News.
