After connecting the charging cable to your iPhone, it doesn’t always detect it? When you move it a little, do false contacts occur? Have you tried multiple Lightning or USB C cables with no success? If all the answers are yes and your device is still not working, you may be very close to solving it. I thought about this myself for a while a couple of years ago, only to finally, after some stupid testing, realize that the problem was in my pocket.

The Lightning port on my iPhone 12 was fine. Well yes it is There was so much dirt inside that the connector didn’t fit properly.. My desire to charge the device – almost – wirelessly – always resulted in dust and microparticles moving freely through the broken connection.

Constant charging with Magsafe kept the port inactive, so the friction from daily Lightning input and output didn’t dust the slot. And if you almost never use it, then the situation gets worse: the dirt that has accumulated over several days sealed with a connector and gradually it forms a layer at the bottom of the hole.

When this layer becomes thick enough, it is easy to notice that the cable does not fit perfectly, which is usually due to additional pressure that compacts and accumulates “micro-things” and makes the situation even worse. Result? An iPhone that doesn’t detect charge well, a cable that comes out easily, and the frustration of not knowing what’s going on.

I discovered this entire process on my iPhone 12, which followed me with my iPhone 14 Pro and which also brought laughter—and some disgusted faces—from my friends when I solved the problem for them in less than a minute. . Now I’ll tell you.

If your iPhone isn’t charging well, clean the port

If the bugs I mentioned are affecting your iPhone, listen to me and don’t take it, at least not yet, to the Apple Store. It is quite possible that after completing the operation everything will work like clockwork. quick cleaning of the charging port. And while you can try, you won’t get anywhere by blowing as hard as you can as if it were a Game Boy cartridge.

Daily iPhone Use causes dirt to accumulate in the charging port and that sooner or later, depending on how you charge the device, this becomes a problem. Before you buy more cables, go to a repair shop, or regret the money it will cost you, do the following.

Search any plastic item with a tip sharp enough to fit into your iPhone’s port. Also make sure it is not flimsy so that do not bend when applying pressure.

I know that under this description you will find a lot of metal objects, but it is not recommended to insert them into a port with contacts where they can cause a short circuit. I also know from experience that it is very tempting to use a SIM eject tool, but please do not do that.

Well, once you have the plastic tool, your job is to very carefully scrape it off. bottom of your iPhone’s Lightning port. Take your time and remove the dirt a little at a time, and when there is no more dirt, blow lightly and finish removing loose residue. Take your time, move slowly and make sure there are no “balls” or lint left inside.

As I was writing these words, I remembered that I hadn’t done this on my iPhone 14 Pro in about two months, so I grabbed my trusty tool and I did what you see in the previous photos.. Although there is dust and very fine lint, almost all I see are tiny fibers of fabric, probably from my jeans.

What you see does not affect the operation in any way, so if you notice errors in charging your iPhone, It is likely that this time you will be able to get much more than I did.. The good news is that after cleaning and reconnecting the charger, everything will be resolved. And if not, then your problem goes further.

Now, if you are hesitant to perform this simple operation or you don’t have the perfect plastic tool at hand, you can go to the Apple Store and find a solution. A quick clean and a spray of compressed air will get your iPhone’s Lightning port looking like new. And yes, they do it for free.

Source: Hiper Textual

Previous articleDARPA agent presented 12-ton robotics with high-speed manholes
Next articleThe Russian flag on car license plates will be mandatory
I'm Ben Stock, a highly experienced and passionate journalist with a career in the news industry spanning more than 10 years. I specialize in writing content for websites, including researching and interviewing sources to produce engaging articles. My current role is as an author at Gadget Onus, where I mainly cover the mobile section.

LEAVE A REPLY

Please enter your comment!
Please enter your name here