IPad is one of Apple’s most versatile devices. Power, screen quality and portability make it an ideal tool for expanding the capacities of your working environment. Apple, for Mac users, even if you have a PC with a window, you will need a third -party solution if you have a window. Fortunately, applications such as intermittent goods allow your iPad to convert a second monitor with a free and very good performance.

In this article We explain step by step how to configure your iPad as a secondary screen of a PC With Windows, with both wireless connection and USB cable.

• You will also be interested in reading: how to use imac, macbook or iPad as a Mac screen

What do you need to start and use this secondary screen?

Be sure to trust the following before you start:

• Windows 10 or higher PC.
• An updated iPad (compatible with iOS 13 or above).
• A Wi-Fi network shared between both devices or USB cable.
• Free application installed on your PC and iPad.

Step 1: Upload the ranges to your PC and iPad

Enter the intervals from your PC and Download the appropriate drive for Windows (Do not use Microsoft Store application).

Then open the App Store on your iPad and call “intermittent Viewer”. Upload like other applications.

Step 2: wireless configuration step by step

When you have the application Installed on both devices:

• Make sure that the iPad and PC are on the same Wi-Fi network.
• Open the intermittent Drive Console application on your PC and verify that it is in case.
• Open the intermittent detection application on iPad. You should automatically detect your PC and show it as an option.
• Tap your PC or IP in the iPad application and accept local network permits.
• Ready! Your iPad will begin to reflect the screen of your PC.

Would you like to extend the screen instead of replicating?

Default, Reflecting your vehicle windows. However, you can use the iPad as an extended screen for more working space:

• Press Windows + P on your PC and select Extnd.
• So you can move windows, applications or additional content to the iPad.

You can also go to configuration> System> screen To rearrange screens and make sure that the cursor movement coincides with your ipad’s physical position.

You may also be interested in reading: How to use it as a console screen

How to stone the iPad screen

After working as a secondary monitor of your iPad You can easily move applications:

• Open the desired application and use Windows + Shift + left/right arrow to quickly move it to iPad.
• Or break to the edge of your screen until it appears on the iPad.

This flow It is especially useful for programmers, designers and editors. Employees with content or multiple open documents.

Not just a productivity device, your iPad can give you an additional screen for your windows

Tactile Use Advantages at intervals

Unlike the basket in MacOS, which has limited tactile interactions, The Araldesk allows you to use the entire iPad surface as a complete touch screen. You can touch, drag, open and move by using your fingers or apple pencils.

This is ideal If you want to manipulate interfaces directly from the tablet Or make additional explanations about what you see.

Without Wi-Fi? Use the USB cable to reflect your screen

If you prefer a cable connectionIt is also possible:

• Connect your iPad to PC using a USB-C or Lightning cable.
• Go to communication interfaces and active USB iOS cable in intermittent applications of your PC.
• Open the application from your iPad and select the USB connection.
• The iPad should automatically connect as a second monitor.

If you don’t have a determined network, this method is useful Or you need a low delay link.

Connection problems?

If you cannot work at intervals, there are some things you can do to improve the connection:

Both devices are in the same Wi-Fi network? Did you access the iPad application to local network access? Has the driver was activated on PC? Have you restarted the router or devices? Have you tried to remove and reinstall the applications? Most errors are caused by network permits or firewall parasite.

How to set screen settings

You can change how the iPad looks as a monitor, and the truth is that it is very easy to do.

• Configuration> System> screen on your PC.
• Use the “definition” function to find out what your home screen is and what high school is.
• Edit the screens that drag the blocks until they reflect your real trend.
• Set resolution, scale and guidance if necessary.

Alternatives to intermittent intervals

Although the intervals are free, there are other options worth examining:

• Duet screen: Payment application with great stability and touch support. Ideal if you are looking for a premium solution.
• Letsview: Although it is less reliable than the latest tests, another free option.

Using iPad as a secondary screen for your Windows PC is an excellent way to increase your efficiency. To expand your field of work, have a second screen to read documents, monitor tasks or work in design, and intermittent vehicles make the iPad into an extra and portable extra monitor. And best: you can do this with free, wireless or cable and full tactile support.

You can follow iPadizat Whatsapp on Facebook, Twitter (x) Or consult our Telegram channel to be up -to -date with the latest technology news.