Is there water in electronics and devices? Learn how to recover your devices

In addition to precautionary measures such as government subsidies to minimize losses in Rio Grande do Sul, there is also great concern about electrocutions that can occur as a result of devices fully connected to the electrical grid.

In addition to this issue; We decided to give some tips that may be valuable in salvaging electronics and household appliances for people all over Brazil. Many can save devices from potentially permanent damage. So enjoy below!

Is there a way to recover wet electronic devices?

Yes! It is possible to recover wet electronic devices, including those submerged in water, after a major flood. However, for this healing to be effective, some specific procedures must be followed.

There are also some types of electronics and household appliances that have greater adhesion to restoration, such as refrigerators and washing machines. Small devices including headsets and mobile phones can also be recoveredbut a certain urgency is required for this to happen.

Generally speaking, there is an almost infallible lead for small appliances damaged by floods. Most people will recommend covering a particular device with brass so that liquids can be absorbed.

Although these food flakes are really effective at removing moisture, unfortunately this will only happen outside the device.

It is important in this sense Disassemble all parts of the device for a deeper cleaning.including drying the interior of the devices. We know that most mobile phones and computers today are waterproof, but we can’t always blindly trust manufacturers.

So if you have exposed your small electronic device to water, remember that internal defense mechanisms and the brass technique alone will not be enough for a full recovery. In these cases, it is also recommended that these devices be taken to an authorized service so that repair can be evaluated.

Tips on how to repair submerged devices

Now, you need to be very careful when talking about larger devices and electronics. If you believe the item can be salvaged, proceed.

And even if you don’t believe it, there is also advice to undergo a technical evaluation to understand which mechanisms are still able to work.

1. Do not plug the device into the socket without checking that it is completely dry.

First of all, The main tip for recovering electronics lost due to the impact of water is to not connect it to power in any way. It may appear harmless and even practically solid to the naked eye, but it may be corroded by small particles inside that are dangerous in contact with electricity.

Also, if the device is working perfectly, you can completely ruin it if you do not take due care.

2. Turn on the device and check its integrity

It is important to open the electronics for inspection before doing more in-depth testing. From there, using the appropriate tools like a screwdriver or Philips, you can tell if it’s already burned out or if it’s still salvageable.

An important tip in this process photographing all parts removed from the device. So, in addition to documenting their condition and asking others for their opinions, you’ll also know how to assemble them in the correct order later.

3. Clean electronic devices carefully

After the device is opened, it is recommended to clean it with a paper towel or dry cloth. If necessary, also use special cleaning fluids for electronic devices, such as isopropyl alcohol or running water.

For example, you can also brush areas with a lot of dirt with the help of a toothbrush.

4. Wait until the equipment is 100% dry

After cleaning the devices thoroughly, leave them to dry in the sun for long hours. Blowers and hair dryers are also accepted. After natural drying, clean flannel and paper towels help keep things dry.

5. Check the specifications of each device before turning it on

Then assemble the device, making sure it is completely dry and not damp at all, and try plugging it in. Washing machines, refrigerators, and even electric ovens may have testing routines. Therefore, refer to the user manual to learn how to perform this step.

There are more details about some electronics and home appliances. For example, refrigerators and washing machines often need water to operate. Therefore, it is interesting to check the full functionality of only individual parts of these devices.

6. If the wet electronic device does not turn on, take it to an authorized service.

If after following all these steps the device you are trying to recover shows no signs of life, take the device to expert technical assistance for a final check as there is still hope. Do not persist in a state of total loss. Your physical security is worth its weight in gold.

Did you like the content? To check out more useful and interesting tips like these, keep following everything we have to offer at TecMundo!