The iPad became the perfect tablet after its launch in 2010. It is a versatile and ever-evolving device like no other, which can be used both for drawing and reading the press and making life easier for airline pilots. However, there are times when iPad has problems while charging. If something strange is happening to you, here are the most common solutions to put an end to your battery nightmare.

Most common problems and solutions when charging iPad

We would like to point out that these solutions are the most common to emerging problems. If for some reason the solutions don’t work, You will need to use Apple technical support. to have a more accurate diagnosis and an effective solution.

The most common solutions to charging problems.

iPad charging slowly

It is very typical, the load takes forever and it takes hours before a minimum battery that guarantees operation is found. The solution is very simple because Most likely, you are charging the tablets with a charger that does not have the necessary power. So, save the original charger for your iPad and if you don’t have one, get one with enough power that you can find on Amazon. Do not overlook Gallium Nitride chargers, a material that greatly prevents the charger from heating up. If you want to keep an eye on someone, this advice may be most appropriate.

Another solution is to replace the charging cable. probably not in the best condition. There are also interesting MFi that don’t skyrocket in price, so our advice is to leave you here.

iPad not charging

If the battery is fine, which should be confirmed, there could be several reasons. The first is this cable and charger are broken. Try others if you have them, or ask someone to borrow them to test. If it starts to load, check back on the Amazon items we left above. For very little money you will have the solution immediately.

iPad Pro charging

The second reason is that the iPhone charging port is dirty. Yes, dust may have entered and compressed, preventing correct connection and current from reaching it. Careful cleaning can be done using a wooden stick and cotton. Dig inside and see if the iPad charges again. If you’re already getting power, that’s it. If not, let’s move on to the third possibility.

In this and sometimes it happens, The iPad’s battery is dead and completely discharged. It was literally dry. Therefore, the loading time should be longer, do not despair. If your iPad has a home button, press and hold the power button and home button until the Apple apple appears. Conversely, if your iPad doesn’t have a home button, you have to quickly press and release the volume button closest to the top button. Quickly press and release the volume button furthest from the top button. Press and hold the top button until the iPad restarts. It has crumbs, so do it calmly. If you do nothing after that, take the SAT because there is something you can’t figure out on your own.

iPad gets very hot

It may indicate a battery problem and needs replacing, but the most common is: either the sun is shining or the quality of the cable is not sufficient and the reader flow is uneven. Change the cable and charger, because if you continue like this, your iPad will be dead in no time and you will regret it.

And any electronic device is no longer a mystery. It’s just a matter of doing some checks that eliminate major problems. In any case, remember that the battery is an element of your iPad that is subject to deterioration. So, if your device is already a few years old, it may be okay to replace it or, if that doesn’t happen, replace the battery.