Fire Stick controller stopped working? Check how to solve

Fire Stick is one of the most practical and functional devices. Play streaming and other apps on older TV models. However, you just need to plug some kind of pendrive into the device’s HDMI input and it will take over the functions of a Smart TV.

However, as with common models, the remote control may cause problems and prevent its use. But fortunately, there are a number of procedures that can be performed to get the device working properly again.

And today TecMundo helps and teaches you What can be done to get the Fire Stick controller working again? Check this out!

Reset your Fire Stick controller

The first thing to do when your remote control stops working is to reset it. To do this, do the following step by step:

1. Remove Fire Stick from TV and wait 60 seconds;

2. Then press and hold the left, Menu and Back keys simultaneously for 12 seconds as shown in the picture below;

3. After the specified time, release all buttons and wait 5 seconds;

4. Now remove the remote control’s batteries;

5. Then connect the Fire Stick to the TV again;

6. Wait until a message appears on the screen stating that the remote control was not found;

7. Then put the batteries back into the remote control;

8, Now press the Home button as shown in the picture below;

9. That’s it, if this is the problem your remote control will work again from then on.

Enable Fire Stick Controller Troubleshooting Mode

Another way to overcome the problem is Enable Solution Mode on your remote control. Inside, it is possible to detect what is happening in the device through a light system. Check it out step by step:

1. Press the “Back” and “Right” buttons on the remote control simultaneously for three seconds as shown in the picture below;

2. Now press the Menu button;

3. Meanwhile, the LED on your remote control will turn green;

4. Then press any of the buttons to try to determine where the problem is. At this time you need to pay attention to the following lighting system:

• Red (blinking slowly) – Low battery power;
• Red (fast flashing) – There is a problem with the remote control that requires rebooting following the previous procedure;
• Orange – The remote control is not paired with Fire TV; you will need to repeat the pairing procedure;
• White – The problem is with your Fire Stick. Make sure it is connected to the TV or turned on. You can reboot to try to resolve the error;
• Blue – Since there is no problem in your control, you need to restart your Fire Stick.

5. That’s it, now exit Troubleshooting Mode; Your remote control will work again.

Check Fire Stick controller batteries

Finally, if none of the previous methods work, we recommend that you do the following: Check your remote control’s batteries. Because when they reach the end of their energy, they start to show small errors when pressing the keys or even stop working altogether.

Then, Use other batteries, preferably new ones, and check if the remote control works properly again.

Did you like the content? Repost on your social networks and tell your followers about this tutorial. Until next time!

Buy Fire Stick TV at a discount on Amazon

Are you looking to purchase a more advanced Fire Stick option or are you looking to secure another one for your home? Take advantage of Amazon offers and buy yours at a discount now!