Chieftec is expanding its Mesh series with the ProCube Mini (CN-01B-OP). This is a compact multifunctional cube chassis in an ITX form factor that, according to the manufacturer, should offer high flexibility for the components used.
The chassis is compatible with ATX PSUs and offers a dual slot GPU up to 320mm, three 3.5″ HDDs, two 2.5″ SSDs and a slim ratio. The front panel combines mesh and brushed aluminum, while the tempered glass side panel on the back should be easy to remove and install.
Chieftec ProCube Mini will be available in July 2022.
| Model name | ProCube Mini |
|---|---|
| Article number | CN-01B-OP |
| Colour | black |
| Material | 0.8mm spcc |
| Supported Motherboard | mini-ITX |
| Dimensions | (DxWxH) 356mm x 260mm x 195mm |
| drive bay external | 1x 5.25″ ultra-thin ODD |
| driver’s compartment trainee | 3x 3.5″ and 2x 2.5″ |
| Nutrition | ATX psu (optional, 140mm – 200mm) |
| Front I/O | 2x usb 3.2 gen 1, audio out (Azalia / hd audio), microphone in, reset |
| Expansion slots | 2 |
| Rear cooling compatibility | 1x 120mm fan and radiator |
| Maximum CPU cooler height | Up to 145mm (depending on 3.5 hdd setup) |
| VGA card length maximum | 230mm – up to 320mm (depending on psu length) |
| Guarantee | 24 months |
Source: Chieftec
Source: Hardware Info
